Question 1: For an experiment comparing more than two treatment conditions you should use analysis of variancerather than separate t tests because:

conducting several t tests would inflate the risk of a Type I error.

separate t tests would require substantially more computations .

a test based on variances is more sensitive than a test based on means.

There is no differences between the two tests, you can use either one.

Question 2: A negative value for a correlationindicates .

decreases in X tend to be accompanied by increases in Y

a much stronger relationship than if the correlation were positive

decreases in X tend to be accompanied by decreases in Y

a much weaker relationship than if the correlation were positive

Question 3: An analysis of variancecomparing three treatment conditions produced dftotal = 24. For this ANOVA, what is the value of dfwithin?

21

3

22

2

Question 4: In general the distribution of F-ratios is .

positively skewed with all values greater than or equal to zero

negatively skewed with all values greater than or equal to zero

symmetrical with a meanof zero

symmetrical with a mean equal to dfbetween

Question 5 : A scatter-plot shows a set of datapoints that are widely scattered around a line that slopes up to the right. Which of the following values would be closest to the correlation for these data?

0.8

0.4

-0.8

-0.4

Question 6 : A set of n = 5 pairs of X and Y values has ΣX = 10, ΣY = 20, and ΣXY = 60. For this set of scores, the value of SP is .

-28

60

-20

20

Question 7 If the null hypothesis is true and there is no treatment effect, what value is expected on average for the F-ratio?

0

1

N – k

k – 1

Question 8: An analysis of variance is used to evaluate the mean differences for a research study comparing three treatments with a separate sample of n = 6 in each treatment. If the data produce an F-ratio of F = 4.10, then which of the following is the correct statistical decision?

Fail to reject the null hypothesis with either α = .05 or α = .01.

There is not enough information to make a statistical decision.

Reject the null hypothesis with either α = .05 or α = .01.

Reject the null hypothesis with α = .05 but not with α = .01.

Question 9: Given the linear correlation coefficient r and the sample size n, determine the critical values of r and use your finding to state whether or not the given r represents a significant linear correlation. Use a significance level of 0.05. r = -0.257, n = 90

Critical values: r = ±0.217, no significant linear correlation

Critical values: r = ±0.207, no significant linear correlation

Critical values: r = ±0.207, significant linear correlation

Critical values: r = 0.217, significant linear correlation

Question 10 : Which of the following is a characteristic of a correlational study?

participants are assigned to groups

participants are assigned to treatment conditions

participants are separated into groups based on a specific characteristic such as age or gender

none of the other options is a characteristic of a correlational study

Question 11: Which of the following pairs of variables should produce a correlation near 0?

driving distance from college and weekly cost of gas for a group of commuting college students

model year (2003, 2004, etc.) and price for a used Honda

IQ and weight for a group of third grade students

number of hours studying and number of errors on a math exam

Question 12: The purpose for post tests is .

to determine whether or not a Type I error was committed

to determine which treatments are significantly different

to determine how much difference exists between the treatments

None of these choices are correct.

Question 13: An analysis of variance comparing three treatment conditions produces dftotal = 24. For this ANOVA, what is the value of dfbetween?

2

21

3

22

Question 14: The Pearson correlation measures .

the degree of linear relationship.

the degree to which the relationship is consistently one directional.

the degree of the relationship without regard to the form of the relationship.

the degree of curvilinear relationship.

Question 15: Given the linear correlation coefficient r and the sample size n, determine the critical values of r and use your finding to state whether or not the given r represents a significant linear correlation. Use a significance level of 0.05. r = -0.695 , n = 25

Critical values: r = ±0.487, significant linear correlation

Critical values: r = ±0.396, significant linear correlation

Critical values: r = ±0.487, no significant linear correlation

Critical values: r = ±0.396, no significant linear correlation

Question 16: For an F-ratio with df = 2, 10, the critical value for a hypothesis testusing α = .05 would be .

99.4

19.39

7.56

4.1

Question 17: Results of an analysis of variance produces SSbetween = 20, SSwithin = 30, and an F-ratio with df = 2, 15. For this analysis, what is the F-ratio?

20/30 = 0.67

10/2 = 5.00

30/20 = 1.50

2/10 = 0.20

Question 18: A set of n = 5 pairs of X and Y values has SSX = 5, SSY = 20, and SP = 8. For these data, the Pearson correlation is .

r = 8/20 = 0.40

r = 8/25 = 0.32

r = 8/100 = 0.08

r = 8/10 = 0.80

Question 19: A researcher reports an F-ratio with df = 3, 36 from an independent-measures research study. Based on the df values, how many treatments were compared in the study and what was the total number of subjects participating in the study?

2 treatments and 35 subjects

3 treatments and 37 subjects

4 treatments and 40 subjects

4 treatments and 36 subjects

Question 20: What is the value of SP for the following set of data?

X Y

1 5

3 3

5 1

8

19

0

-8

See the attached file.

Please see the attached file:

Question 1: For an experiment comparing more than two treatment conditions you should use analysis of variance rather than separate t tests because:

conducting several t tests would inflate the risk of a Type I error.

separate t tests would require substantially more computations .

a test based on variances is more sensitive than a test based on means.

There is no differences between the two tests, you can use either one.

Answer: conducting several t tests would inflate the risk of a Type I error.

Question 2: A negative value for a correlation indicates .

decreases in X tend to be accompanied by increases in Y

a much stronger relationship than if the correlation were positive

decreases in X tend to be accompanied by decreases in Y

a much weaker relationship than if the correlation were positive

Answer: decreases in X tend to be accompanied by increases in Y

Negative correlation means that the two variables move in opposite direction; when X increases Y decreases and vice versa.

Question 3: An analysis of variance comparing three treatment conditions produced dftotal = 24. For this ANOVA, what is the value of dfwithin?

21

3

22

2

Answer: 22

dftotal = 24 = total sample size -1

Therefore total sample size= 24+1=25

dfwithin = total sample size- number of treatment= 25-3=22

Question 4: In general the distribution of F-ratios is .

positively skewed with all values greater than or equal to zero

negatively skewed with all values greater than or equal to zero

symmetrical with a mean of zero

symmetrical with a mean equal to dfbetween

Answer: positively skewed with all values greater than or equal to zero

Question 5 : A scatter-plot shows a set of data points that are widely scattered around a line that slopes up to the right. Which of the following values would be closest to the correlation for these data?

0.8

0.4

-0.8

-0.4

Answer: 0.4

Since the slope is positive (line slopes up to the right), correlation is positive. Since data points are widely scattered, correlation is low (closer to zero).

Question 6 : A set of n = 5 pairs of X and Y values has ΣX = 10, ΣY = 20, and …

Answers 20 MCQ on ANOVA, correlation, hypothesis testing etc.